plastic mold Laser Cutting

点击数：109242011-10-26 14:53:14　来源: Rapid prototypes,making molds, mold tool,custom molding,mold makers HC-Mold

1. High precision: Positioning Accuracy 0.05mm, repeat positioning accuracy of 0.02 mm
2. Narrow kerf: laser beam is focused into a small spot, so that the focus at very high power density, material level very quickly heated to vaporization, evaporation to form holes. As the beam and the material is relatively linear movement, so that holes in a row to form a very narrow kerf width. Incision width is generally 0.10 ~ 0.20mm.
3. Smooth cutting surface: cutting surface without burr, cut surface roughness within the general control in Ra12.5.
4. Speed: Cutting speeds up to 10m/min, maximum positioning speed of up to 70m/min, cutting speed than the line much faster.
5. Cutting quality: non-contact cutting, trimming heat effect is very small, basically no thermal deformation of the workpiece, when the punch completely avoid the formation of the collapsed material side of kerf in general does not require secondary processing.
6. Without damaging the workpiece: laser cutting head is not in contact with the surface to ensure that does not scratch the workpiece.
7. Hardness of the material being cut free from the impact: Laser can be steel, stainless steel, aluminum alloy plate, alloy and other processing, regardless of what kind of hardness, can be cut without distortion.
8. Not affect the shape of the workpiece: Laser processing of flexible, and can be processed any graphics, you can cut pipes and other profiles.
9. Non-metallic cutting can be carried out: such as plastic, wood, PVC, leather, textiles, plexiglass, etc..
10. Save Mold Investment: laser processing without mold, no mold consumption, not repair of mold, saving time for replacement of mold, thus saving processing costs, reduced production costs, especially for large products processing.
11. Save materials: use of computer programming, can be products of different shapes Nesting entire board material to maximize material utilization.
12. Improve new product development: product drawings to form, immediately after the laser can be processed in the shortest possible time to be kind of new products.